Bottom screw thread #:#50/#80
Model: 6384-231
Order NO.: 6384-231
841
Specific parameters will be adjusted according to product upgrades, without notice.
Heavy wall glass reactor available with 60mm, 100mm, or 150mm diameter Schott® style flange with O-ring groove at top. Connects to 6433 head with a 6517 quick-release clamp. Reactor bottom has an Screw thread for installing a 5838-83 (#80) or 5857-86 (#50) adapter with a filter support and bottom drain valve. The 60mm reactor head has a #15 Screw thread center neck, (2) #15 and (1) #7 Screw thread side necks. The 100mm head has a #15 Screw thread center neck, (3) #15, and (1) #7 Screw thread side necks. The 150mm head has a #15 Screw thread center neck, (4) #15, and (1) #7 Screw thread side necks. The Screw threads allow for vacuum or pressure applications, and for easy draining of material out of the reactor. The main bearing, funnel and condenser are designed to connect to the threads on the head via compression bushing connections. The #7 Screw thread is used for connecting a 1/4 inch O.D. tubing fitting to allow for a direct connection to a pressure source or a #6448 pressure manifold.
Complete item consists of: reactor body with 60mm CAPFE O-ring, head with Screw threads, 6517 clamp, PTFE bottom threaded adapter and valve with CAPFE O-ring, retainer ring, 350 micron polypropylene screen support, 100 micron polyethylene support, 5844 adapter, 8044 bearing, 8075 stir rod, 8089 multi-paddle agitator, 6024 condenser, 7299 addition funnel and #7 Screw thread bushing. #80 bottom adapter also comes with a perforated glass plate support.
Pressure manifold, stand and clamps are optional. For replacement glass fritted discs and supports see 5848 or 5814. See 13511 or 13566 motor; for chuck, see 8124 or 8126. Use 7855-829 CAPFE O-ring for #50 adapter, 7855-864 for #80 bottom adapter.
> Stand and Support Shelf not included.
> 150mL size requires chain clamp rather than a shelf.
> For #80, bottom also available with 1/2" MNPT.
Capacity, mL | 150** | 600** | 1000 | 2000 | 3000 | 6000 |
Flange I.D., mm (in.) | 60 (2.4) | 60 (2.4) | 100 (4) | 100 (4) | 150 (6) | 150 (6) |
Bottom screw thread # | #50 | #50 | #80 | #80 | #80 | #80 |
Body I.D., mm | 60 | 83 | 100 | 130 | 150 | 150 |
Approx. Height*, mm | 100 | 205 | 180 | 210 | 205 | 395 |
Top CAPFE O-Ring | 7855-878 | 7855-878 | 7855-880 | 7855-880 | 7855-881 | 7855-881 |
Order No. | 6384-225 | 6384-231 | 6384-235 | 6384-239 | 6384-243 | 6384-247 |
* Height measurements are measured from top of flask flange to seal on top thread.
** 150mL and 600mL heads have angled side necks.
About Contact Statement Privacy Policy
Copyright © 2024 WIGGENS CO., LTD. All rights reserved.