PRODUCT DETAILS 
High Torque / High Speed Overhead Stirrers
Speed Range：20~3000rpm，Maximum Viscosity：100000cps
High Torque / High Speed Overhead Stirrers
Speed Range：12~1800rpm，Maximum Viscosity：150000cps
High Torque / High Speed Overhead Stirrers
Speed Range：40~6000rpm，Maximum Viscosity：70000cps
Remotely Controllable Ultra High Torque / High Speed Stirrers
Output Power :150W ,Torque Accuracy:± 5% in-lb,Maximum Viscosity :100000 cps,Output Power:150 W
Remotely Controllable Ultra High Torque / High Speed Stirrers
Speed Accuracy :± 1rpm, Torque Accuracy:± 5% in-lb,Maximum Torque :565 N-cm,Output Power:150 W
Remotely Controllable Ultra High Torque / High Speed Stirrers
Speed Accuracy :± 1rpm ,Torque Accuracy:± 5% in-lb,Maximum Torque :170 N-cm
For use with Glass and Metal Stirrer Shafts
This product is designed to provide an effective guide for Glass and Metal Shaft stirrers over a range of temperatures without shedding particles from the seal, whilst maintaining a vacuum.
Universal Stirrer Guides for use with standard taper ground glass joints can be used with PTFE Shaft Stirrers and glass and meatal shaft stirrers.
The newest design of mechanical stirring seals with all parts that are in contact with liquid or vapor being made of PTFE,RULON, or PEEK material.
Designed to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask.
Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm
Truebore Flexible Drive Shaft Overhead Stirrer
SHAFT Fully flexible drive shaft connects the motor to any size or type of reactor stir shaft.
Very low vapor pressure, highly inert, nonflammable grease.
Good chemical stability, no reaction with oxygen, hydrogen, hydrocarbons and other chemical substances. The usable temperature range is -35℃ ~ 290℃ .
HI-LUBE Lubricant for Strong Liquids
Resistance to acid and alkali, soluble in organic solvents, and suitable for oxidizing gases. The temperature can reach260℃ it is non-combustible, and non-oxidized.
Smooth, stable, odorless oil based lubricants, free of silicone, suitable for lubrication of joint and piston. The melting point is 52℃ , can be cleared with xylene.
All-position holder connects at any angle in any plane. Consists of two holders connected by double plate-joint which sets holders 900 from each other.
Lab frame hook connector allow one-handed assembly of two components with one adjustment screw. Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm
Material : Stainless Steel (Chromium plating) Separatory Funnel Size : 250ml-70mm / 500ml-90mm / 1,000ml-100mm
Material : Stainless Steel (Chromium plating) For Funnel & Separatory Funnel
Heavy-Duty Clamp Holder, Jumbo clamp holder has amaximum grip size of 22mm Heavy duty version of the regular holder is for use wherever clamping at 90° angle is required
(Regular) Will grip rods up to and including 19mm diameter. Attaches clamp at right angle.
Material : Brass (Chromium plating) Adjustable angle holder, different from the other holder fixed at 90 degrees
Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.
Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.
Two-Prong Clamp, Dual adjustment clamp has a maximum grip size of 73mm. Two-prong design is ideal for beakers, flasks, and test tubes. Jaws adjust independently. Overall length is 255mm. Clamp extends 127mm
The design of the electrical “Lift 240“ is identical with that of the mechanical 240 x 240 mm WIGGENS lab jack. Both variants can be used and replaced, as desired, in existing structures. An end stop can be manually adjusted at the outside.
Available to support experiment tools such as stirrers, water baths, flasks and etc in height control
Material：Ordinary steel, stainless steel Max. load：5 kg Dimensions (W x D)：315X200mm Height：550, 750, 950 mm
Material：Ordinary steel, stainless steel Dimensions (W x D)：315X200mm Height：550, 750, 950 mm
About Contact Statement Privacy Policy
Copyright © 2018 WIGGENS CO., LTD. All rights reserved.
