Industrial Rotary Evaporator

Home > Product > Rotary Evaporator > Industrial Rotary Evaporator >

Industrial Rotary Evaporator

Working range:0~150 ℃

Model: STRIKE 100

Order NO.: SQFU082237


Specific parameters will be adjusted according to product upgrades, without notice.

Quotation Request



STRIKE100 is a large-capacity rotary evaporator designed for industrial plants. It meets all the process needs by using borosilicate glass and PTFE permitting aggressive substance treatment. The unit works under vacuum or atmosphere conditions. The rotation of the 50 or 100L evaporation flask in the thermostatic bath results in forced convection and homogenous distribution of the product, thus preventing sedimentation. Moreover, it ensures high evaporating exchange surface. The sealing system guarantees the perfect vacuum tightness and maintenance-free operation. Possibility to customize glassware for client needs.

- Distillation (continuous and discontinuous)
- Solvent recycling
- Reflux reaction process
- Component drying
- Fine chemical synthesis
- Crystallization
- Extraction
- Purification
- Scale-up process

- Pharmaceutical
- Chemical
- Cosmetic
- Herb extraction
- Petrochemical
- Food

Total safety system
The industrial safety rotary evaporators are able to safeguard the user from any risk during work. The thermostatic bath is covered by a transparent shield providing the operator with utmost protection from glass breaking and spray at high temperature. The thermostatic bath and the protective shield are lifted by means of a hydraulic system electronically controlled. An automatic system lowers the thermostatic bath when power failure, door opening and overheating occur. It is also inserted on glassware a brake disc in order to avoid sudden overpressure.

Vacuum sealing system
A great feature of these rotary evaporators is its sealing system made of self-lubricating material which guarantees perfect vacuum tightness. This sealing system does not require any maintenance.

Heating bath
The heating bath is lifted by means of a hydraulic system which, in case of power failure or doors opening, goes automatically down to avoid fluid overheating and the process will immediately stop. Electric heater is enhanced to 8Kw to ensure continuous evaporation of the product even in the worst conditions.

The process operating conditions can be set and displayed: any value error or anomalous temperature will block the electric power. For version STRIKE100 ATEX is a "LCD display anti-reflection coating glass panel" . For version STRIKE100 is a graphical color display 7" touch-screen.

Electronic controller
STRIKE100 & STRIKE100 ATEX are fully controlled by a PLC (Programmable Logic Controller) which allows for controlling the parameters as well as setting them directly by means of the keys.
Clients could acquire on an external PC through serial communication all the process parameters through special software for data acquisition and management. Clients could remotely control the instrument from an external PC via serial communication. Clients could save and recall up to 20 methods or "recipes" work that the customer can customize at any time (NOT ON ATEX VERSION). In addition, the instrument has control algorithm that allow you to finish the process of evaporation / distillation or separation of solvents automatically by reading the temperature of the vapors.

Parameters measurement, visual display and recording of the following:
- Bath pre-set and real temperature
- Vapor pre-set and real temperature
- Pre-set and real rotation speed
- Pre-set and real vacuum reading and setting

Technical features

Thermic Bath
Working range ℃ 0~150
Accuracy ℃ ± 2
Resolution ℃ 0.1
Set point YES (1℃ step)
Type of control PID
Maximum oscillation during checkout ℃ ± 3
Power resistor KW 8
Heater power density 3W/cm2
Over-temperature protection YES
Temperature sensor Three-wire PT100
Level sensor YES
Filling level Yes -Manual
Vapour Temperature
Working range ℃ 0~150
Accuracy ℃ ± 2
Resolution ℃ 0.1
Temperature sensor Three-wire PT100
Working range rpm 5~100
Accuracy rpm ± 2
Rotation speed reading YES
Resolution rpm 1
Engine 0,18KW, 380Vac YES
Vacuum Control
Working range mbar 0~1000
Accuracy mbar ±5mbar
Resolution mbar 1
Absolute vacuum reading YES
Display Digital
Vacuum regulation YES
Lifting control ON/OFF YES
Hydraulic lifting YES
PLC controlled YES
Export data interface YES
Remote control interface YES
Thermal bath overheat YES
Bath temperature exceeding set point YES
Soft start rotation YES
Rotation speed monitoring YES
Security status (rotation,lifting, heating=off) YES
Evaporation flask protection opening YES
100Lt evaporation flask YES
50Lt evaporation flask YES
20L evaporation flask NO
20Lt collecting flask 2
Cooler exchange surface (mq) 1.43/custom
Over-pressure protection YES
Protection with rupture disc YES
Quick closing YES
ATEX certification YES
Dimensions (WxDxH mm) 1830x890x2110
Vapours cycle maximum temperature YES
Vapours cycle minimum temperature YES
Vapours cycle temp range YES
Receipt/methods in memory YES
Recipes customization YES
Data acquisition on PC YES
Remote Control YES
lowering bath in case of alarm YES
Plastic coated glassware  

Order information

STRIKE 100 Order No.
100L version  
100L reflux glassware 1.43m2 2x20L SQFU082237
100L reflux glassware 1.43m2 1x20L SQFU083070
100L descending glassware 100lt 1.43m2 2x20L SQFU081873
100L descending glassware 100lt 1.43m2 1x20L SQFU083071
50L version  
50L reflux glassware 1.43m2 2x20L SQFU083073
50L reflux glassware 1.43m2 1x20L SQFU081309
50L descending glassware 1.43m2 2x20L SQFU083074
50L descending glassware 1.43m2 1x20L SQFU083075


STRIKE 100 ATEX Order No.
100L version  
100L reflux glassware 1.43m2 2x20L SQFU083077
100L reflux glassware 1.43m2 1x20L SQFU083078
100L descending glassware 100lt 1.43m2 2x20L SQFU083079
100L descending glassware 100lt 1.43m2 1x20L SQFU083080
50L version  
50L reflux glassware 1.43m2 2x20L SQFU083084
50L reflux glassware 1.43m2 1x20L SQFU083085
50L descending glassware 1.43m2 2x20L SQFU080799
50L descending glassware 1.43m2 1x20L SQFU083086

Accessories for STRIKE 100

Description Order No.
Stainless steel trolley for evaporating flask handling SQFW078521
50L Evaporation vessel for STRIKE 100 SQEG034290
100L Evaporation vessel for STRIKE 100 SQEG034291
20L Plastic-coated collecting vessel SQEG036866
Graduated collecting vessel 20L for Strike 100 SQEG085790
Heat exchanger 1.43m2 for Strike 100, stainless steel coils SQQE083087
Heat exchanger 1, 43m2 for Strike 100 SQEG034294



  • Wiescher Str. 11a, 42277 Wuppertal
  • Germany
  • Tel.: +49 202 373 29 58-0
  • E-mail:

  • Room 426, Hall A, Office Building M8, No. 1 Jiuxianqiao East Road, Chaoyang District, Beijing
  • Tel.: +86 400-809-2068
  • E-mail:


About Contact Statement Privacy Policy

Copyright © 2024 WIGGENS CO., LTD. All rights reserved.