NM PLUS 100 RACK HYDROGEN GENERATOR

Description

DESCRIPTION

The Chemtron Gas NM Plus Rack instrument combines the reliability of the hydrogen generator with an optional zero air generator into a 19” rack. The generator can be installed in any suitable 19” static or mobile cabinet. This simple but effective instrument can supply all your FID gas and carrier gas requirements. Designed as a hazard free alternative to high pressure cylinders, all that is required is deionized water, compressed air and a standard electrical supply for

weeks of continuous operation. Utilizing our proprietary Proton Exchange Membrane (PEM) inside a 100% titanium cell provides superior generator performance and cell longevity. The unique high pressure permeation membrane drying system eliminates the requirement for desiccant cartridges and the associated downtime and cost. Innovative software control allows unrivaled operational performance and safety as well as the additional options of auto water feed, remote networking and cascading for built in redundancy. With a maximum output capacity of 1350 mL/min, one generator can supply up to 33 FIDs. The compact design allows the generator to be installed directly in the laboratory eliminating the requirement for long gas lines and guaranteeing the delivery of high purity gas to your instrument.

A sophisticated control system connected to an easy to use touch screen control continuously monitors vital operating parameters to ensure a safe and consistent performance. Built in sensors will shut the generator down if internal/external leaks are present, contaminated water, low water or over pressure. This is why Chemtron Gas generator meet the strict safety guidelines to be certified for CE, FCC and MET (CSA and UL compliant).

Compressed air is prefiltered then purified using a state of the art combined heated catalyst module. The resultant air is free from total hydrocarbons to <0.1 ppm, making it ideal for all FID applications. These levels assure high sensitivity, a flat stable baseline and no ghost peaks.

INCREASE EFFICIENCY

A constant gas supply with a guaranteed purity, eliminates interruptions of analyses to change cylinders and reduces the amount of instrument re-calibration required.

ENHANCE RESULTS

Hydrogen as a carrier gas is faster and more sensitive than expensive helium, with run time savings of 25% to 35% without a decline in resolution. The use of hydrogenas a carrier gas allows lower temperature elution, thus extending the life of thechromatograph column.

IMPROVE SAFETY

Gas is produced on demand, which allows for the safe use of the hydrogen generator when cylinders are prohibited or regarded as potentially dangerous. Sophisticated software control and full alarm capability, including for hydrogen leaks, gives the user full control of the gas supply.

ENHANCE PERFORMANCE

Gas generator can be installed in the laboratory close to the instrument, eliminating the need for long gas lines from external cylinder supplies. A constant guaranteed high purity gas supply improves stability and ensures greater reproducibility of results

APPLICATIONS

ANALYZER APPLICATIONS

> Process GC analyzers detector fuel, oxidant gas

> Emissions test analyzers fuel gas, oxidant gas

> Stack gas analyzers fuel gas, oxidant gas

OTHER LAB APPLICATIONS

> On-board gas supply for mobile laboratories

FEATURES

BENEFITS

Eliminates dangerous high pressure cylinders | Ideal for all 19”cabinet applications | Removes the logistics, inconvenience, downtime and costs of a cylinder system | Flow capacity to match your specific instrument demands | Ideal for all GC detector applications | Exceeds the requirements for the most demanding GC applications | Superior hydrogen production with reliable long life cell | Minimal maintenance | PC monitoring | Peace of mind | Improve your laboratory work flow and productivity

Specifications

MODELS & SCECS	RACK-NM 100 Plus
Flow mL/min	100
Purity	>99.9996%
Dew point at 7 barg (100 psig)	-73ºC (-99.4ºF)
Outlet pressure barg (psig)	1.4 to 11 (20 to 160)
Technology	PEM (Proton Exchange Membrane) - 100% Titanium cell
Drying system	No maintenance cold dual dynamic regeneration system
Deionized water quality	Minimum < 1 micro S/cm @ 25ºC - 1 Mohm-cm @ 25ºC - ASTM II Recommended < 0.2 microS/cm @ 25ºC - 5 Mohm-cm @ 25ºC - ASTM II
External water tank (liters)	External 5 liter bottle and internal pump
Safety	Automatic shut down - internal/external hydrogen leak, overpressure and low water
Display	Touch screen with operating parameters, system status and safety alarms
LED indicators	Power on/off, system ready, errors
Interface	USB mod A
Electrical supply	110-120V 60Hz / 220-240V 50Hz
Power consumption (watts)	90
Dimensions mm (in)	19” rack W x 3U H x 500D (19.6)
Weight kg (lbs)	19 (41.9)
Shipping dimensions mm (in)	720W x 375H x 565D (28.3W x 14.7H x 22.2D)
Shipping weight kg (lbs)	23 (50)
Operating temp ℃ ( ℉ )	15 to 35 (59 to 95)
Outlet connection	1/8" Compression
Certification	CE, FCC, MET (UL and CSA compliant)
OPTIONS
Zero Air module	1.8 or 5 L/min
External water tank	19” rack 5 liter (2U) or 10 liter (3U) tank
Cascading	Up to 10 units – built in redundancy for guaranteed up-time
Interface	RS232/RS485, external contacts, PC control and intranet

Is this information helpful?

Rack Hydrogen generator

Description

Related products

Download

Overhead Stirrer

Stirrer / Hotplate Stirrer，Heating Elements,Temp. Stir Controller

Vacuum Pumps，Solvent Recovery Systems，Filtration System，Liquid Pump

Evaporate laboratory solvents in maximum safety

Accessories

WND3010

Pressure gauge

CQG010

Buffer vessel

WND30036

PU pressure tubing

P440031

Quick connector

WND30009

Pressure reducing valve

WND3001

Air Filter and Separator

WND3001-01

Filter cartridge

WND12201

Installtion kits ,when GH series provides gas to two system

DB-2-tube/DC-2-tube

Tubing / adapter / Valve / Connectors,etc

CONTACT

PRODUCTS

SERVICE