Digital Pulse Mixer

Home > Product > Shaker / Mixer > Digital Pulse Mixer >

Digital Pulse Mixer

Working speed range:100~1500rpm

Model: DPM-24

Order NO.: W5021001

1403

Specific parameters will be adjusted according to product upgrades, without notice.

Quotation Request

PRODUCT OVERVIEW

Description

WIGGENS Digital Pulse Mixer is capable of performing high or low speed pulse vortexing/mixing for most applications. This unit is able to accommodate a wide variety of glassware, racks, well plates or reactor blocks for accurate, repeatable results. The microprocessor-based control technology allows for display of speed, multi-function timer, and pulse profiling.

Your advantages
> Working speed range from 100rpm to 1500rpm
> Bright TFT with display resolution 1rpm, easy to operate
> Built-in digital timer (seconds: 1-60, minutes 1-60, hours 1-24)
> Preset run times of 30, 60, 90 and 120 seconds
> User selectable pulse profile (Pulses-per-minute: 1-100), Ppm-duty-cycle: 1-99 %
> Timer and Pulse mode may be combined for timed-pulse mode
> Fail Safe Mode to prevent speed fluctuations
> BLDC motor provides low noise and strong durability
> User-friendly operating panel (4 buttons)
> Smooth Starting function to protect the sample from spilling out
> RS232 interface, optional software for real time data acquisitionn

Application
Solution phase synthesis, solid phase chemistry, bacteria cultivation

Specifications

Model DPM-24
Order No. W5021001
Working speed range(rpm) 100~1500
Speed control type Feedback Control
Control panel TFT, Push button
Motor type BLDC motor
Quick timing mode 30s, 60s, 90s, 120s are available
Pulse mode

Pulses adjustment range(min): 1-100

Duty Cycle adjustment range(%): 1-100

Timer and Pulse mode

Timer: 00:00:00 to 24:60:60

Pulses adjustment range(min): 1-100

Duty Cycle adjustment range(%): 1-100

Electrical requirement 110 or 240VAC, 50/60 Hz


Sample Preparation
Our Digital Pulse Mixers are ideal for preparation work in volumetric flasks.
Simply changing the chemical resistant bottom foam pad allows you to quickly switch flask sizes while using one standard hold down top.

Order No. Description
W5021101 Hold down top with holes
W5021102 15mm pad for 25mL vol. flask, 49 Position
W5021103 15mm pad for 50mL vol. flask, 14 Position
W5021104 15mm pad for 100mL vol. flask, 14 Position
W5021105 15mm pad for 250mL vol. flask, 8 Position
W5021106 15mm pad for 500mL vol. flask, 6 Position
skype
  • CONTACT

  • WIGGENS GmbH
  • Wiescher Str. 11-13 Haus 3
  • 42277 Wuppertal
  • Germany
  • Tel.: +49 7248 4529088
  • E-mail: info@wiggens.com

  • WIGGENS CHINA
  • Room 426, Hall A, Office Building M8, No. 1 Jiuxianqiao East Road, Chaoyang District, Beijing
  • Tel.: +86 400-809-2068
  • www.wiggens.com

About Contact Statement Privacy Policy

Copyright © 2024 WIGGENS CO., LTD. All rights reserved.