Interval mix function in program mode can be properly set according to users' test condition.
> Microprocessor PID control ensuring consistent shaking motion and precision accuracy.
> Speed range from 150 to max. of 1500 rpm (depending on the choice of interchangeable blocks)
> Maximum 9 temperature range-specific calibration.
> Memory function of programmed protocols allowing relevant parameters (such as temp., rpm, time) of each protocol step to be stored. -Up to 10 protocols allowed for memory storage. -Up to 10 steps allowed for each protocol. -Interval Mix function (continuous switching between shaking and phasing)
> Two types of timer modes: -Timer 1 starts only after reaching the set temp. -Timer 2 starts right after the timer setting.
> 96-Well Tube Block Set with Covers
> 0.5mL / 1.5mL / 50mL Tube Block Set with Covers
> Bright VFD display with responsive touch buttons.
> Its powder coated stainless steel body is highly chemicalresistant and easy-to-clean.
> Optimal heat transfer is achieved by the tight coupling design of the main body and the corrosion-resistant anodized aluminum blocks.
> Low-profile design with rubber feet for minimal vibration and noise.
> Blocks can be easily interchanged by the included block lifter
|Control||Feedback control PID|
|Display||VFD (0.1℃ resolution)|
|Temperature||Range (℃ )||Amb.+5-100℃|
|Stability at 80℃ (±℃ )||0.3|
|Variation at 80℃ (±℃ )||0.7|
|Heating power (W)||360|
|Over Current||Current limit protection|
|Shaking System Dimension (WxDxH)||Motion Type||Orbital|
|Speed range （rpm）||96-well tube block 150 -1500|
|0.5mL tube block 150- 1000|
|1.5 mL tube block 150-1000|
|50 mL tube block 150-800|
|Overall(WxDxH)（mm）||276 x 334 x 170|
|Electrical requirements||230V, 50/60 Hz，1.7A|
|Order No.||Description||Max. Mountable Tube|
|W5012451||0.5 mL Tube Block Set with Cover||0.5mL x 48 holes (microtube)|
|W5012452||1.5 mL Tube Block Set with Cover||1.5mL x 24 holes (microtube)|
|W5012453||50 mL Tube Block Set with Cover||50mL x 6 holes (centrifuge tube)|
|W5012454||96-well Tube Block Set with Cover||0.2mL x 96 holes (microtube)|