Large-Capacity Rotary Evaporator ST20

2022-07-12 14:34:30    admin321 Share

Description: ST20 has both industrial and laboratory rotary evaporation features. It meets all the process needs by using Boro...

ST20 has both industrial and laboratory rotary evaporation features. It meets all the process needs by using Borosilicate glass and PTFE permitting aggressive
 substances treatment. The plant allows for evaporation of volatile components (lowboiling) so as to separate them from the residual ones (high-boiling) due  to the difference of their boiling points. Easy and totally safe startup, check and stop procedures of the process: ST20 is provided with a transparent protection shield for the evaporation flask and the thermostatic bath.

1. Heating Bath
 The heating bath is lifted by means of a hydraulic system which, in case of Power failure, goes automatically down to avoid fluid overheating.

2. Sealing System
 A great feature of ST20 is its sealing system made of self-lubricating material which allows a perfect vacuum-tight. This sealing system does not require any maintenance.

3. Pressure And Temperature
 ST20 runs under atmospheric pressure conditions or vacuum. It guarantees a perfect vacuum tight up to 5 mbar. The perfect sealing up to 5 mbar allows for
 reduced process time due to low evaporation temperature of the fluid. The thermostatic bath can run both with water and oil allowing to reach 180℃
 maximum temperature; it also permits evaporation of any solvent under atmospheric pressure conditions. The heating bath is supplied with two 3KW electric heaters.

4. Measurement, Visual Display And Recording Of The Following Parameters:
 Bath pre-set and real temperature
 Vapor pre-set and real temperature
 Pre-set and real rotation speed
 Pre-set and real vacuum reading and setting

Return