Electrical Aspirator Pump VE-11

2022-07-11 11:51:14    admin249 Share

Description: VE-11 creates a vacuum using an aspirator pump that is dependent on the vapor pressure of water. Ideal for rota...

VE-11 creates a vacuum using an aspirator pump that is dependent on the vapor pressure of water. Ideal for rotary vacuum evaporators, decompressing distillatories, vacuum dryers, and vacuum filtering units.
Features
 * Economic use of resources

* High flow rate up to 36 L/min

* Vacuum can be regulated between 20 mmHg and 74 mmHg

* Employs two water flow and gas suction devices, a check valve, and an upstream prevention device

* Housing is made of PP to enhance longevity

* Small amounts of liquid in the machine don’t harm the systemBuilt-in circulating pump and water tank makes this unit portable and       eliminates water waste.

* Circulating pump continuously forces water quietly across a set of aspirators, and therefore clean and efficient.

* Included (2) metal aspirators to create a vacuum with a built-in check valve to prevent backflow of water into the aspirator pump.

* Submerged parts: 304 stainless steel, polypropylene silicone, and nickel-coated brass.

* Tank features a drain port and spigot for easy water changes.

* Unlike other vacuum pumps the VE-11 can suck a little bit of solvent. (water)

Included Accessories

* Tank / Aspirating pump / Tank closure.

* Two aspirators.

* Two ?6mm (0.02?) silicone rubber tube 20cm (0.7 ft) in length and an additional ?6mm (0.02?) silicone rubber tube 100cm (3.3 ft)in length.

Return