DESCRIPTION
The Chemtron Gas Whisper-0 Hybrid Nitrogen + Air can produce up to 120 L/min of high purity LC/MS grade nitrogen at pressures up to 8 barg (116 psig). These generator are engineered to transform standard compressed air into a safe regulated nitrogen and high purity air supply with minimal operator attention and maintenance. Nitrogen is produced by utilizing a combination of filtration and membrane separation technologies. A standard supply of compressed air is filtered by high efficiency coalescing filters to remove all contaminants down to 0.1 micron. A unique proprietary membrane then separates the air into a concentrated nitrogen stream. Air is purified using aunique air purification membrane removing contamination and water.

Membrane technology offers some unique performance benefits for LC/MS users including phthalate free nitrogen, silent operation, no moving parts and no electrical requirements. The generator can be installed directly in the laboratory either floor or walled mounted and requires minimal operator attention or maintenance. The generator are designed to run continuously providing a clean, dry high purity nitrogen supply.

INCREASE EFFICIENCY
The relatively high gas volumes required by LCMS instruments make cylinder supply inappropriate and liquid nitrogen expensive. A constant, uninterrupted gas supply eliminates interruptions of analysis to change cylinders.

RETURN ON INVESTMENT
Payback period can be as short as 6 to 12 months.

IMPROVE SAFETY
Nitrogen produced at low pressure and ambient temperature removes the hazards associated with high pressure cylinders and liquid Dewars.

ENHANCE PERFORMANCE
Production of a constant flow and pressure of nitrogen improves the consistency of the LC/MS analysis, results and reproducibility.

SUPERIOR TECHNOLOGY
The Chemtron Gas membrane nitrogen generator require no electricity, have no moving parts and minimal noise.

FEATURES
Produces a continuous supply of high purity nitrogen | On-demand supply 24/7 | Flow rate at 8 barg (116 psig): 8 to 120 L/min | Purity:LC/MS grade | Integrated economy mode as standard | Proprietary membrane technology | 2-year complete product warranty | No noise, no moving parts and no electricity

BENEFITS
Eliminates dangerous high pressure cylinders helping to keep your employees safer | Removes the logistics, inconvenience, downtime and costs of a cylinder system | Flow capacity to match your specific instrument demands | Ideal for all LC/MS applications | Reduces compressed air consumption and cost | Superior air purification with long life membrane | Peace of mind | Install directly in the  laboratory

APPLICATIONS
LC/MS INSTRUMENTS

> Nebulizing gas

> Curtain gas

> Shield gas

> Sheath gas

> Electrospray gas

> APCI gas

> Jet stream gradient

SPECTROSCOPY

> Nuclear magnetic resonance spectrometers (NMR)

ANALYZERS

> Thermal analyzers (TGA/DSC)

OTHER APPLICATIONS

> Sample concentrators

> Evaporative light scattering detector (ELSD)

> Corona detectors

> Charged aerosol (CAD)

> Sample evaporators

> Cell incubators

> IVF Stem Cell incubators

> Mask aligner

> Fume hood/cabinet purge

> 3D printer inerting

> Glove box purge

OPERATING DIAGRAM
Membrane separation technique:
Compressed air is forced through a hollow fiber membrane, with selective permeation of the different components - nitrogen, oxygen, carbon dioxide, water vapor and traces
of rare gases - depending on the rate of diffusion.

The rate of diffusion of nitrogen through the membrane is slower than the other components, which thus flow outside of the fiber membrane. Just nitrogen remains inside which is then subsequently discharged, ready for use.

Specifications