This steel cabinet allows for the safe operation of photochemical reaction equipment. Eliminates the need for a hood, or to construct a special safe area to operate the U.V. lamp. The cabinet has welded seams and a fully hinged door with lip to prevent light from escaping. The door has a key lock for positive closure and it controls a safety switch that prevents U.V. lamp operation unless door is closed. The floor of cabinet is sealed to 1" height to contain any possible spills.
Inside the cabinet is a plug-in light, auxiliary 120v socket and a 60 CFM exhaust fan, all controlled by an ON/OFF switch. Also inside are pin jack sockets for lamp connection and a removable 1/2" aluminum rod, mounted vertically, for clamping the reactor.
The cabinet is supplied with a 6ft. grounded power cord with NEMA plug for connection to a 120v source, and a 6ft., two-wire cord with male pin jacks for connection to the lamp power supply. Handles are mounted on both sides for easier carrying, and there are rubber feet on the bottom of the cabinet for stability. Painted black inside, chemically resistant blue outside.

*designed by Dr. John Penn, West Virginia University Dept. of Chemistry, Morgantown, WV 26506
For foreign use, 230 volts, 50Hz, use with stepdown transformer #NE05F1430