Continuous-flow borosilicate glass vessel provides uniform treatment by forcing reactant to pass in front of horn tip. The degree of processing is controlled by varying the power level and flow rate, max. 1.5L/Min. Reactants are pumped through side port, overflowing inner cup and out through bottom port. Treated material drains completely (no hang-up). Use of 9852-41 slide adapter in #25 Screw thread at top allows probe position to be varied within the inlet cup area, thereby maximizing use of ultrasonic energy.
Must be used with 1/2-inch O.D. (9814-25) horn and either 1/2-inch–5 extender (9816-06) or 1/4-inch-5 (9818-17) microtip. Inlet and outlet tubes are 1/2-inch O.D. (13mm). #7 Screw thread located below top thread is for bleed or vacuum connection. For latter use, bushing with hole needs to be ordered for tubulature connection. Operated in vertical position only.
Complete item consists of reactor, #7 PTFE plug and #25 nylon bushing. Slide adapter and horn must be ordered separately.