Accessories

Home > Products > Overhead Stirrer > Accessories >
Universal PTFE Stirrer Seal

Universal PTFE Stirrer Seal

Universal PTFE Stirrer Seal

For use with Glass and Metal Stirrer Shafts

For use with Glass and Metal Stirrer Shafts

This product is designed to provide an effective guide for Glass and Metal Shaft stirrers over a range of temperatures without shedding particles from the seal, whilst maintaining a vacuum.

PTFE High Vacuum Shaft Guide

PTFE High Vacuum Shaft Guide

The newest design of mechanical stirring seals with all parts that are in contact with liquid or vapor being made of PTFE,RULON, or PEEK material.

PTFE Stirrer Shafts

PTFE Stirrer Shafts

Universal Stirrer Guides for use with standard taper ground glass joints can be used with PTFE Shaft Stirrers and glass and meatal shaft stirrers.

COLLAR with PTFE Gasket

COLLAR with PTFE Gasket

Designed to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask.

LUBRICANT Stopcock

LUBRICANT Stopcock

Smooth, stable, odorless oil based lubricants, free of silicone, suitable for lubrication of joint and piston. The melting point is 52℃ , can be cleared with xylene.

HI-LUBE Lubricant for Strong Liquids

HI-LUBE Lubricant for Strong Liquids

Resistance to acid and alkali, soluble in organic solvents, and suitable for oxidizing gases. The temperature can reach260℃ it is non-combustible, and non-oxidized.

KRYTOX GPL Fluorinated Grease

KRYTOX GPL Fluorinated Grease

Good chemical stability, no reaction with oxygen, hydrogen, hydrocarbons and other chemical substances. The usable temperature range is -35℃ ~ 290℃ .

KRYTOX LVP High Vacuum Grease

KRYTOX LVP High Vacuum Grease

Very low vapor pressure, highly inert, nonflammable grease.

Truebore Flexible Drive Shaft Overhead Stirrer

Truebore Flexible Drive Shaft Overhead Stirrer

SHAFT Fully flexible drive shaft connects the motor to any size or type of reactor stir shaft.

Square Clamp Holder

Square Clamp Holder

Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm

Foot

Foot

Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm

Ring Clamp

Ring Clamp

Material : Stainless Steel (Chromium plating) For Funnel & Separatory Funnel

Extension-Type Ring

Extension-Type Ring

Material : Stainless Steel (Chromium plating) Separatory Funnel Size : 250ml-70mm / 500ml-90mm / 1,000ml-100mm

Pinch Cock

Pinch Cock

Material : Stainless Steel (Nickel plating)

Frame Holder

Frame Holder

Lab frame hook connector allow one-handed assembly of two components with one adjustment screw. Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm

Clamp Holder All-Position

Clamp Holder All-Position

All-position holder connects at any angle in any plane. Consists of two holders connected by double plate-joint which sets holders 900 from each other.

Clamp Swivel Holder

Clamp Swivel Holder

Material : Brass (Chromium plating) Adjustable angle holder, different from the other holder fixed at 90 degrees

Clamp Holder

Clamp Holder

(Regular) Will grip rods up to and including 19mm diameter. Attaches clamp at right angle.

Jumbo Clamp Holder

Jumbo Clamp Holder

Heavy-Duty Clamp Holder, Jumbo clamp holder has amaximum grip size of 22mm Heavy duty version of the regular holder is for use wherever clamping at 90° angle is required

Clamp Holder

Clamp Holder

Only suitable for Single Rod Stand

Clamp Holder

Clamp Holder

Only suitable for Single Rod Stand

Clamp Holder

Clamp Holder

Only suitable for Double Rod Stand

Clamp

Clamp

Universal Swivel, “Power Hold”

Screw Cock

Screw Cock

Material : Brass (Nickel plating)

Extension Rod

Extension Rod

Extend the rod to the expected length for your application

Chain Clamp

Chain Clamp

Material : Stainless Steel / Vinyl Coating

CLAMP

CLAMP

Gooseneck Extension Clamp, Vinylized Jaws

Three-Prong Clamps

Three-Prong Clamps

Three-Prong Clamps

Two-Prong Clamps

Two-Prong Clamps

Two-Prong Clamp, Dual adjustment clamp has a maximum grip size of 73mm. Two-prong design is ideal for beakers, flasks, and test tubes. Jaws adjust independently. Overall length is 255mm. Clamp extends 127mm

Utility Clamp Flat

Utility Clamp Flat

Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.

Utility Clamp 3Prong

Utility Clamp 3Prong

Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.

WH Stand

WH Stand

(Stand with base plate H-shape)

WF Stand

WF Stand

Material:Ordinary steel, stainless steel Max. load:5 kg Dimensions (W x D):315X200mm Height:550, 750, 950 mm

WF Stand

WF Stand

Material:Ordinary steel, stainless steel Dimensions (W x D):315X200mm Height:550, 750, 950 mm

WH Stand

WH Stand

(Stand with base plate H-shape)

Laboratory Lifting platform

Laboratory Lifting platform

Available to support experiment tools such as stirrers, water baths, flasks and etc in height control

Laboratory Electrical lift

Laboratory Electrical lift

The design of the electrical “Lift 240“ is identical with that of the mechanical 240 x 240 mm WIGGENS lab jack. Both variants can be used and replaced, as desired, in existing structures. An end stop can be manually adjusted at the outside.

Anchor Impeller

Anchor Impeller

Mixing of viscous up to highly viscous media

Centrifugal stirrers, 2 flexible blades

Centrifugal stirrers, 2 flexible blades

Mixing of media with low and middle viscosity

Propeller stirrers, 3 fix blades

Propeller stirrers, 3 fix blades

Mixing of media with low and middle viscosity

Propeller stirrers, 4 fix blades

Propeller stirrers, 4 fix blades

Mixing of media with low and middle viscosity

Paddle stirrers, 6 holes

Paddle stirrers, 6 holes

Mixing of media with low and middle viscosity

Paddle stirrers, 3 holes

Paddle stirrers, 3 holes

Mixing of media with low and middle viscosity

Propeller stirrers, 4 vertical blades

Propeller stirrers, 4 vertical blades

Mixing of media with low and middle viscosity

Paddle stirrers, 2 fix blades

Paddle stirrers, 2 fix blades

Mixing of media with low and middle viscosity

Propeller stirrers, 2 flexible blades

Propeller stirrers, 2 flexible blades

Mixing of media with low and middle viscosity

ADJUSTABLE TURBINE

ADJUSTABLE TURBINE

Stainless steel core surrounded by PTFE mantle

FLAT TYPE METRIC

FLAT TYPE METRIC

Stainless steel core surrounded by PTFE mantle

4 BLADE ANGLED TYPE 45° METRIC

4 BLADE ANGLED TYPE 45° METRIC

Can be used up to a max. temperature of 280℃

Impeller Shafts for Blades (PTFE Coated)

Impeller Shafts for Blades (PTFE Coated)

桨片可以安装在上述搅拌轴上,防腐蚀,并且不会掉碎屑

Plain Impeller Shafts (PTFE Coated)

Plain Impeller Shafts (PTFE Coated)

Can be used up to a max. temperature of 280℃

Retreat Curve Impeller (PTFE Coated)

Retreat Curve Impeller (PTFE Coated)

Can be used up to a max. temperature of 280℃

Centrifugal Stirrer, 2-Bladed (PTFE Coated)

Centrifugal Stirrer, 2-Bladed (PTFE Coated)

Can be used up to a max. temperature of 280℃

Anchor Impeller (PTFE Coated)

Anchor Impeller (PTFE Coated)

Can be used up to a max. temperature of 280℃

Screw Propeller, 4-Bladed (PTFE Coated)

Screw Propeller, 4-Bladed (PTFE Coated)

Can be used up to a max. temperature of 280℃

skype
  • CONTACT

  • WIGGENS GmbH
  • Gässlesweg 22-24, 75334 Straubenhardt, Germany
  • Tel.: 0049 7248 4529088
  • E-mail: w.merk@wiggens.com

  • WIGGENS CHINA
  • Room 303, Hall C, Office Building M8, No. 1 Jiuxianqiao East Road, Chaoyang District, Beijing
  • Tel.: +86 400-809-2068
  • info@wiggens.com
  • www.wiggens.com

About Contact Statement Privacy Policy

Copyright © 2018 WIGGENS CO., LTD. All rights reserved.