Accessories for Overhead Stirrers

Home > Products > Accessories > Accessories for Overhead Stirrers >
CLAMP

KA00-50D

CLAMP

Gooseneck Extension Clamp, Vinylized Jaws

WH Stand

WH11-D

WH Stand

(Stand with base plate H-shape)

Frame Holder

KA00-69

Frame Holder

Lab frame hook connector allow one-handed assembly of two components with one adjustment screw. Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm

WH Stand

WH11-S

WH Stand

(Stand with base plate H-shape)

WF Stand

WF11-D

WF Stand

Material:Ordinary steel, stainless steel Dimensions (W x D):315X200mm Height:550, 750, 950 mm

Chain Clamp

KA00-56

Chain Clamp

Material : Stainless Steel / Vinyl Coating

WF Stand

WF11

WF Stand

Material:Ordinary steel, stainless steel Max. load:5 kg Dimensions (W x D):315X200mm Height:550, 750, 950 mm

Spring Steel Clip

KC.KCM14

Spring Steel Clip

Material : Nickel

Extension Rod

WE-11

Extension Rod

Extend the rod to the expected length for your application

Screw Cock

KA00-72

Screw Cock

Material : Brass (Nickel plating)

Clamp Holder

WH4

Clamp Holder

Only suitable for Double Rod Stand

Pinch Cock

KA00-71

Pinch Cock

Material : Stainless Steel (Nickel plating)

Clamp Holder

WH1

Clamp Holder

Only suitable for Single Rod Stand

Clamp Holder

WH2

Clamp Holder

Only suitable for Single Rod Stand

Jumbo Clamp Holder

KA00-70A

Jumbo Clamp Holder

Heavy-Duty Clamp Holder, Jumbo clamp holder has amaximum grip size of 22mm Heavy duty version of the regular holder is for use wherever clamping at 90° angle is required

Clamp Holder

11080-19

Clamp Holder

(Regular) Will grip rods up to and including 19mm diameter. Attaches clamp at right angle.

Extension-Type Ring

KA00-67F

Extension-Type Ring

Material : Stainless Steel (Chromium plating) Separatory Funnel Size : 250ml-70mm / 500ml-90mm / 1,000ml-100mm

Ring Clamp

KA00-65

Ring Clamp

Material : Stainless Steel (Chromium plating) For Funnel & Separatory Funnel

Clamp Swivel Holder

KA00-71B

Clamp Swivel Holder

Material : Brass (Chromium plating) Adjustable angle holder, different from the other holder fixed at 90 degrees

Foot

KA00-73

Foot

Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm

Square Clamp Holder

KA00-68

Square Clamp Holder

Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm

Utility Clamp 3Prong

KA00-58

Utility Clamp 3Prong

Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.

Utility Clamp Flat

KA00-57

Utility Clamp Flat

Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.

Two-Prong Clamps

KA00-50

Two-Prong Clamps

Two-Prong Clamp, Dual adjustment clamp has a maximum grip size of 73mm. Two-prong design is ideal for beakers, flasks, and test tubes. Jaws adjust independently. Overall length is 255mm. Clamp extends 127mm

Clamp

11084-11

Clamp

Universal Swivel, “Power Hold”

Three-Prong Clamps

KA00-52

Three-Prong Clamps

Three-Prong Clamps

Clamp Holder All-Position

11090-17

Clamp Holder All-Position

All-position holder connects at any angle in any plane. Consists of two holders connected by double plate-joint which sets holders 900 from each other.

Laboratory Electrical lift

Laboratory Electrical lift

The design of the electrical “Lift 240“ is identical with that of the mechanical 240 x 240 mm WIGGENS lab jack. Both variants can be used and replaced, as desired, in existing structures. An end stop can be manually adjusted at the outside.

Laboratory Lifting platform

KA11-91

Laboratory Lifting platform

Available to support experiment tools such as stirrers, water baths, flasks and etc in height control

Truebore Flexible Drive Shaft Overhead Stirrer

8081-05

Truebore Flexible Drive Shaft Overhead Stirrer

SHAFT Fully flexible drive shaft connects the motor to any size or type of reactor stir shaft.

KRYTOX LVP High Vacuum Grease

8116-10

KRYTOX LVP High Vacuum Grease

Very low vapor pressure, highly inert, nonflammable grease.

KRYTOX GPL Fluorinated Grease

8115-08

KRYTOX GPL Fluorinated Grease

Good chemical stability, no reaction with oxygen, hydrogen, hydrocarbons and other chemical substances. The usable temperature range is -35℃ ~ 290℃ .

HI-LUBE Lubricant for Strong Liquids

8119-07

HI-LUBE Lubricant for Strong Liquids

Resistance to acid and alkali, soluble in organic solvents, and suitable for oxidizing gases. The temperature can reach260℃ it is non-combustible, and non-oxidized.

LUBRICANT Stopcock

8118-10

LUBRICANT Stopcock

Smooth, stable, odorless oil based lubricants, free of silicone, suitable for lubrication of joint and piston. The melting point is 52℃ , can be cleared with xylene.

'STIR-LUBE' Ace Trubore®, Stirrer Lubricant

8117-10

'STIR-LUBE' Ace Trubore®, Stirrer Lubricant

A superior, low melting, silicone-base lubricant which liquifies at body temperature.

COLLAR with PTFE Gasket

8127-10

COLLAR with PTFE Gasket

Designed to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask.

For use with Glass and Metal Stirrer Shafts

5.0.0619

For use with Glass and Metal Stirrer Shafts

This product is designed to provide an effective guide for Glass and Metal Shaft stirrers over a range of temperatures without shedding particles from the seal, whilst maintaining a vacuum.

Universal PTFE Stirrer Seal

KA22-02

Universal PTFE Stirrer Seal

Universal PTFE Stirrer Seal

PTFE High Vacuum Shaft Guide

8050-02

PTFE High Vacuum Shaft Guide

The newest design of mechanical stirring seals with all parts that are in contact with liquid or vapor being made of PTFE,RULON, or PEEK material.

PTFE Stirrer Shafts

5.101.1.7

PTFE Stirrer Shafts

Universal Stirrer Guides for use with standard taper ground glass joints can be used with PTFE Shaft Stirrers and glass and meatal shaft stirrers.

Magnetic Drives

MD-24

Magnetic Drives

Magnetic drives are designed for agitating a fully vacuumed flask. Multi-functional easy to replace impeller.

skype
  • CONTACT

  • WIGGENS GmbH
  • Gässlesweg 22-24, 75334 Straubenhardt, Germany
  • Tel.: +49 7248 4529088
  • E-mail: info@wiggens.com

  • WIGGENS CHINA
  • Room 303, Hall C, Office Building M8, No. 1 Jiuxianqiao East Road, Chaoyang District, Beijing
  • Tel.: +86 400-809-2068
  • info@wiggens.com
  • www.wiggens.com

About Contact Statement Privacy Policy

Copyright © 2019 WIGGENS CO., LTD. All rights reserved.