Filter Reactors

Home > Product > Glass reactor > Filter Reactors >

600ml Jacketed Filter Reactor, Pressure Version

Bottom screw thread #:#50/#80

Model: 6386-110

Order NO.: 6386-110

969

Specific parameters will be adjusted according to product upgrades, without notice.

Quotation Request

PRODUCT OVERVIEW

Description

Heavy wall glass reactor, jacketed version for cooling or heating of reactor. Available with 60mm, 100mm, or 150mm diameter Schott® flange with O-ring grove at top. Connects to 6433 head with a 6517 quick-release clamp. Reactor bottom has an Screw thread for installing a 5838-83 (#50) or 5857-86 (#80) adapter with a filter support and bottom drain valve. Jacket inlet/outlet are size 28/15 O-ring ball joint connections, sealed tangentially for more efficient circulation. The 60mm reactor head has a #15 Screw thread center neck, (2) #15 and (1) #7 Screw thread side necks. The 100mm head has a #15 Screw thread center neck, (3) #15 and (1) #7 Screw thread side necks. The 150mm head has a #15 Screw thread center neck, (4) #15 and (1) #7 Screw thread side necks. The Screw threads allow for vacuum or pressure applications and for draining material out of the reactor. The main bearing, funnel and condenser are designed to connect to the threds on the head via compression bushing connections. The #7 Screw thread is used for connecting a 1/4 inch O.D. tubing fitting to allow for a direct connection to a pressure source or a 6448 pressure manifold.
Complete item consists of: reactor body with 60mm CAPFE O-ring, head with Screw threads, 6517 clamp, PTFE bottom threaded adapter and valve with CAPFE O-ring, retainer ring, 350 micron polypropylene screen support, 100 micron polyethylene support, 5844 adapter , 8044 bearing, 8075 stir rod, 8089 multi-paddle agitator, 6024 condenser, 7299 addition funnel and #7 Screw thread bushing. #80 bottom adapter also comes with a perforated glass plate support.
Pressure manifold, stand, and clamps are optional. For replacement glass fritted discs and supports, see 5848 or 5814. For motor, see 13511 or 13566; for chucks, see 8124 or 8126. Use 7855- 829 CAPFE O-ring for #50 adapter, 7855-864 for #80 bottom adapter.

> Stand and Support Shelf not included.
> 150mL size requires chain clamp rather than a shelf.
> For #80, bottom also available with 1/2" MNPT.

 

Ball Joint Inlet/Outlet (28/15)
Capacity, mL Flange I.D., mm (in.) Bottom screw thread Body I.D., mm Approx. Height*, mm Top CAPFE O-Ring Order No.
150** 60 (2.4) #50 60 100 7855-878 6386-107
600** 60 (2.4) #50 83 205 7855-878 6386-110
1000 100 (4) #80 100 180 7855-880 6386-115
2000 100 (4) #80 130 210 7855-880 6386-120
3000 150 (6) #80 150 205 7855-881 6386-124
6000 150 (6) #80 150 395 7855-881 6386-128
Screw thread Inlet/Outlet (#11, 3000 & 6000mL are #15)
150** 60 (2.4) #50 60 100 7855-878 6386-507
600** 60 (2.4) #50 83 205 7855-878 6386-510
1000 100 (4) #80 100 180 7855-880 6386-515
2000 100 (4) #80 130 210 7855-880 6386-520
3000 150 (6) #80 150 205 7855-881 6386-524
6000 150 (6) #80 150 395 7855-881 6386-528

* Height measurements are measured from top of flask flange to seal on top thread.
** 150mL and 600mL heads have angled side necks.

Accessories

skype
  • CONTACT

  • WIGGENS GmbH
  • Wiescher Str. 11a, 42277 Wuppertal
  • Germany
  • Tel.: +49 202 373 29 58-0
  • E-mail: eusupport@wiggens.com

  • WIGGENS CHINA
  • Room 426, Hall A, Office Building M8, No. 1 Jiuxianqiao East Road, Chaoyang District, Beijing
  • Tel.: +86 400-809-2068
  • E-mail: info@wiggens.com

  • www.wiggens.com

About Contact Statement Privacy Policy

Copyright © 2024 WIGGENS CO., LTD. All rights reserved.