Rugged, heavy wall reactor with 60mm, 100mm, or 150mm Schott® style top flange with o-ring groove at top, for connection to 6527, 6528, or 6529 heads, with 6517 quick-release clamp. Bottom has an Screw thread (internal glass thread) for installing 5838-83 (size 50) or 5857-86 (size 80) bottom adapter with filter support and drain valve. Head has three 24/40 joints on 60mm size; four 24/40 joints on 100mm and 150mm sizes.
Complete item consists of: reactor body with CAPFE o-ring, head with joints, 6517 clamp, PTFE bottom adapter with CAPFE o-ring (with perforated plate—#80 thread only), retainer ring, 350 micron polypropylene screen support and 100 micron polyethylene support, 5844 adapter, 5839 shutoff valve (optional larger valve is available), 8066 bearing, 8075 stirring rod, and 8089 multi-paddle agitator.
For replacement glass fritted support, polyethylene support, or polypropylene screen, see 5848 or 5814. For condenser and funnel, see 6029 and 7298; stoppers with 24/40 joints, see 8250. For stirring motor, see 13511 or 13566 motor; for chuck, see 8124 or 8126. Use 7855-829 CAPFE O-ring for #50 adapter, 7855-864 for #80 bottom adapter.

> Stand and Support Shelf not included.
> 150mL size requires chain clamp rather than a shelf.
> For #80, bottom also available with 1/2" MNPT.
 

* Height measurements are measured from top of flask flange to seal on top thread.
** 150mL and 600mL heads have angled side necks.